Quick answer: 700 mm of top per person without technology and 800 mm with a microphone or monitor at every seat; 1,200–1,400 mm wide; 740 mm high. Leave at least 1,000–1,200 mm of clear space around the table so chairs can be pulled out and people can walk behind them.
Size table by number of people
The table counts the people seated along the sides. “With technology” means a microphone or monitor at every seat: each person then needs 800 mm instead of 700, and the table at least 1,400 mm of width to house the connection boxes.
| People | Without technology | With technology | Recommended shape |
|---|---|---|---|
| 4 | 1,400 × 1,200 mm | 1,600 × 1,400 mm | Rectangular or round Ø 1,200 mm |
| 6 | 2,100 × 1,200 mm | 2,400 × 1,400 mm | Rectangular |
| 8 | 2,800 × 1,200 mm | 3,200 × 1,400 mm | Rectangular or boat-shaped |
| 10 | 3,500 × 1,200 mm | 4,000 × 1,400 mm | Boat-shaped |
| 12 | 4,200 × 1,300 mm | 4,800 × 1,400 mm | Boat-shaped or oval |
| 14 | 4,900 × 1,300 mm | 5,600 × 1,500 mm | Boat-shaped or oval (modular) |
| 16 | 5,600 × 1,400 mm | 6,400 × 1,500 mm | Oval or modular |
| 20 | 7,000 × 1,400 mm | 8,000 × 1,600 mm | Modular, U-shaped or ring |
| 24 | 8,400 × 1,500 mm | 9,600 × 1,600 mm | Modular U-shape or ring |
| More than 24 | Modular: 700 mm per seat | Modular: 800 mm per seat | Ring, U-shape or hemicycle made of modules |
Indicative sizes from our technical office; every table is adjusted to the room.
If the ends are occupied (head of the table), add 700–800 mm for each occupied end, or choose a curved end, which gives the person sitting there more room.
Width matters as much as length
At 1,000 mm wide, people facing each other sit too close and there is no room for technology in the centre. That is why we start at 1,200 mm for tables without technology and 1,400 mm when the table has pop-up monitors, a microphone at every seat or a central connectivity band. From 12 people upwards the table increases the width to 1,300–1,600 mm to keep the proportions right.
How much space the room needs
A simple rule: room size = table size + 2.2–2.4 m in each direction (1.1–1.2 m per side). If there are cabinets, screens or a walkway behind the chairs, increase that margin. A 4,000 × 1,400 mm table needs a room of about 6.2 × 3.6 m.
Which shape to choose
- Rectangular: makes the best use of long, narrow rooms.
- Oval or with curved ends: everyone can see each other and the table gains presence.
- U or V-shaped: points everyone towards a screen or a chair.
- Semicircular (hemicycle): for boards and plenary sessions with a top table.
- Modular: one table that changes size with each meeting.
From 14–16 people upwards the table is usually made in modules: the modular boardroom table goes from a meeting of 10 to a board of 50 with the same sections. You can try all these shapes with your number of people in our 3D configurator, which calculates the sizes instantly.
How we do it at Eban Premium
We start from the room: you send us the floor plan or the dimensions and the number of people, and we propose length, width, shape and the technology that fits at each seat. We design the table in 3D, make it in our factory in Silla (Valencia, Spain) and install it in the room. More information on boardroom and meeting tables.
Frequently asked questions
How much space does each person need at a boardroom table?
700 mm of top per person on tables without technology and 800 mm when every seat has a microphone or monitor. With very wide executive chairs, allow 800 mm as well.
How high is a boardroom table?
740 mm, the same as a desk. If the chairs are very low or very high it is worth adjusting it.
How wide does a table with pop-up monitors need to be?
At least 1,400 mm. The monitors, microphones and connection boxes take up the centre of the top and need space underneath; on tables for 20 people or more, 1,600 mm.
Can a large table be made in several parts?
Yes. Long tables are made in modules with concealed joints so they fit in the lift and can be assembled in the room with no visible joints.
Do you know what the room is like? Tell us and we will propose size, shape and materials.
By the technical office of Eban Premium, manufacturer of bespoke boardroom tables in Silla (Valencia, Spain). More guides on the Eban Premium blog.
